The indicator light on your charger blinks red when an abnormal situation is detected.
If safe to do so follow these steps:
1. Cut the power to the charging station: in the switchboard, set the dedicated charging station circuit breaker to OFF.
2. Unplug the charging cable.
3. Plug the charging cable back in. The connector must be fully inserted.
4. Power up the charging station: reset the dedicated charging station circuit breaker to ON.
If the indicator light does not turn back to green, contact your electrician. When you contact your electrician, give the full reference for your equipment (model, catalogue number, serial number). This information can be found on the sticker attached to the side of the equipment